Getting Started with DATASTOR

6 articles

QuickStart Guide - Enterprise Protection Server

Our QuickStart document will lead you through the steps to prepare a server and install Enterprise Protection Server, then configure a store and protection plan. It is designed to give you a quick introduction to the product. From here you can further your understanding of the product by experime...

QuickStart Guide - Vault to Cloud

This document will lead you through the steps to archive data to the cloud, and to restore data from the cloud. It is designed to give you a quick introduction to the product using default settings. From here you can further your understanding of the product by experimenting with different setting...

QuickStart Guide - Vault to Tape

Our QuickStart document will lead you through the steps to archive data to tape and to restore data from tape. It is designed to give you a quick introduction to the product using default settings. From here you can further your understanding of the product by experimenting with different settings...

DATASTOR Shield - Quantum Quick Start Videos

Click below to start setting up your DATASTOR Shield software: Step 1: Install Your SoftwareStep 2: Install the Tape DeviceStep 3: Configuring the Software to Backup to DiskStep 4: Configuring the software to vault to tape

Barcode labels required to vault to a tape library

The Quantum DATASTOR Shield and DATASTOR Enterprise Protection Server software require barcode labels be affixed to tapes when used with a tape library, e.g. the Quantum SuperLoader 3. Affix a barcode label to the spine of each tape cartridge, opposite the side that exposes the tape. Then, insert th...

Quantum Superloader 3 Driver Installation

A tape library attached to a server running a Windows operating system requires installation of two drivers, one for the medium changer device and one for the tape drive device embedded in the tape library. To prepare the Quantum SuperLoader 3 tape library for use with the DATASTOR Shield vaulting f...